Address Table Settings3-893Web – Click Address Table, Static Addresses. Specify the interface, the MACaddress and VLAN, then click Add Static Address. Then set this as a permanentaddress or to be deleted on reset.Figure 3-51. Static AddressesCLI – This example adds an address to the static address table, but sets it to bedeleted when the switch is reset.Displaying the Address TableThe Dynamic Address Table contains the MAC addresses learned by monitoring thesource address for traffic entering the switch. When the destination address forinbound traffic is found in the database, the packets intended for that address areforwarded directly to the associated port. Otherwise, the traffic is flooded to all ports.Command Attributes• Interface – Indicates a port or trunk.• MAC Address – Physical address associated with this interface.• VLAN – ID of configured VLAN (1-4094).• Address Table Sort Key – You can sort the information displayed based on MACaddress, VLAN or interface (port or trunk).• Dynamic Address Counts – The number of addresses dynamically learned.• Current Dynamic Address Table – Lists all the dynamic addresses.Console(config)#mac-address-table static 00-e0-29-94-34-de interfaceethernet 1/1 vlan 1 delete-on-reset 4-150Console(config)#
