Navigating the Web Browser Interface3-33Configuration OptionsConfigurable parameters have a dialog box or a drop-down list. Once a configurationchange has been made on a page, be sure to click on the “Apply” button to confirmthe new setting. The following table summarizes the web page configurationbuttons.Notes: 1. To ensure proper screen refresh, be sure that Internet Explorer 5.x isconfigured as follows: Under the menu “Tools / Internet Options / General /Temporary Internet Files / Settings,” the setting for item “Check for newerversions of stored pages” should be “Every visit to the page.”2. When using Internet Explorer 5.0, you may have to manually refresh thescreen after making configuration changes by pressing the browser’s refreshbutton.Panel DisplayThe web agent displays an image of the switch’s ports. The Mode can be set todisplay different information for the ports, including Active (i.e., up or down), Duplex(i.e., half or full duplex, or Flow Control (i.e., with or without flow control). Clicking onthe image of a port opens the Port Configuration page as described on page 3-67.Figure 3-2. Front Panel IndicatorsTable 3-1. Web Page Configuration ButtonsButton ActionRevert Cancels specified values and restores current values prior to pressingApply.Apply Sets specified values to the system.Help Links directly to web help.
