179Configuring the SCSI/SCSI RAID HBAThis section briefly shows how to create a RAID 1 (mirror) volume. Thisfeature requires installation/presence of LSI Logic 20320-R or LSI Logic22320-R U32 SCSI controllers.How to use SCSI HBA setup utilityDuring the Power-On Self Test (POST), press + to enter theLSI Logic Configuration Utility.Loading HBA Default Settings1 In the LSI Logic MPT SCSI Setup Utility, please press F2 and selectGlobal Properties. Then, select .2 Press ESC, then select .3 Move cursor to <53C1020/1030> and press Enter.4 Move cursor to and press Enter.5 Press ESC, then select .How to use SCSI RAID HBA setup utilityHow To Create RAID 1 (Mirror) volume with a HotSpare Disk1 In the LSI Logic MPT SCSI Setup Utility, please select <53C1020/1030> and press Enter.2 Move cursor to and press Enter.3 In Array Disk field, press Space key to change the hard disk to[Yes].Note: In the Array Disk field, if you change settings, you will seethe following messages. Press the DELETE key to erase data.F3 - keep Data (Create 2 disk array)Delete - Erase Disk (Create 2 to 6 disk array)4 In Hot Spare field, press Space key to change the hard disk to [Yes].
