Appendix C: RAID Configuration180Note: In the Hot Spare field, if you change settings, you will seethe following messages. Press the DELETE key to ignore it.WARNING: Data on drive will be LOST!Press DELETE if data loss OK or any other key to cancel.5Press ESC, then select .RAID Volume InitializationAfter you create RAID volume and save the changes, the disk controllerwill initialize RAID volume automatically. As LSI Logic 20320-R/22320-Rcan support background initialization, you don°¶t have to wait for theinitialization to complete. Now, you can exit LSI Logic ConfigurationUtility.Exit and Restart the server1Press ESC, then select . Then, youwill see a [Global properties saved. Hit any key to reboot.]message.2Press a key to reboot system.MegaRAID Configuration UtilityTurn on the system power. When prompted, press + toenter the MegaRAID Configuration Utility. After entering theMegaRAID Configuration Utility, you will see the Management Menuon the screen.Load RAID Card Default Setting1Select Objects from Management menu.2Select Adapter from Objects. The adapter setting will be shown onthe screen. You can change the setting from this menu.3Select Factory Default and YES to load the default settings.4Press + + to reboot the server.
