Acer Aspire L100 Service Manual

Also see for Aspire L100: User guide User guide

Contents

Chapter 2 27Alt+F4 : Hidden SettingParameter Description OptionsHard Disk Boot Priority Press [Enter] to enter the sub menu to selectHard Disk Boot Device Priority.Use wx to select a device, thenpress<+> to move it up, or < - > tomove it down the list.Virus Warning This feature allows you to enable the VIRUSwarning function for IDE Hard Disk boot sectorprotection. If this function is enabled and thereis someone attempt to write data into this area,BIOS will show a warning message on screenand the alarm will beep.EnabledDisabledSilent Boot This features allows you to enable or disable ifthe screen logo to display or no during POSTEnabledDisabledConfiguration Table This feature allows you to enable or disable ifshowing summary screen or notEnabledDisabledQuick Power On Self Test This feature allows the system to skip certaintests while booting. When this function isenabled, it will decrease the time needed toboot the system, which means to quick poweron self test functionEnabledDisabledFirst / Second / Third BootDeviceThe item allows you to set the sequence of bootdevice where BIOS attempts to load the diskoperating system.Floppy, LS120, Hard Disk, CD-ROM,ZIP, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, DisabledVirus Warning [Disabled] Item HelpCPU L1 & L2 Cache [Enabled]Silent Boot [Enabled] Menu Level XConfiguration Table [Disabled]XHard Disk Boot Priority [Press Enter]Quick Power On Self Test [Enabled]First Boot Device [CDROM]Second Boot Device [Floppy]Third Boot Device [CD ROM]Boot Other Device [Enabled]Boot Up NumLock Status [On]Gate A20 Option [Fast]Security Option [Setup]APIC Mode [Enabled]HDD S.M.A.R.T Capability [Disabled]Limit CPUID Max. to 3 [Enabled]Intel XD bit [Disabled]CPU Thermal Monitor 2(TM2) [Enabled]ASF support [Disabled]Init Display First [Onboard/PEG]On-Chip Frame Buffer Size [8MB]CMOS Setup Utility-Copyright © 1984-2004 Award SoftwareAdvanced BIOS FeaturesKLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1: General HelpF5: Previous Values F7: Default Setting