Acer Aspire L100 Service Manual

Also see for Aspire L100: User guide User guide

Contents

Chapter 4 65Keyboard Error Or No Keyboard Present Cannot initialize the keyboard. Make sure thekeyboard is attached correctly and no keys arepressed during POST. To purposely configure thesystem without a keyboard, set the error haltcondition in Setup to HALT ON ALL, BUTKEYBOARD. The BIOS then ignores the missingkeyboard during POST.Keyboard is locked out - Unlock the key This message usually indicates that one or morekeys have been pressed during the keyboard tests.Be sure no objects are resting on the keyboard.Memory Test: This message displays during a full memory test,counting down the memory areas being tested.Memory test fail If POST detects an error during memory testing,additional information appears giving specifics aboutthe type and location of the memory error.Override enabled - Defaults loaded If the system cannot boot using the current CMOSconfiguration, the BIOS can override the currentconfiguration with a set of BIOS defaults designedfor the most stable, minimal-performance systemoperations.Press TAB to show POST screen System OEMs may replace the PhoenixTechnologies Award BIOS POST display with theirown proprietary display. Including this message inthe OEM display permits the operator to switchbetween the OEM display and the default POSTdisplay.Primary master hard disk fail POST detects an error in the primary master IDEhard drive.Primary slave hard disk fail POST detects an error in the secondary master IDEhard drive.Secondary master hard disk fail POST detects an error in the primary slave IDE harddrive.Secondary slave hard disk fail POST detects an error in the secondary slave IDEhard drive.BIOS Messages Action/FRU