Acewell ACE-100- User Manual

Acewell ACE-100- User Manual Manual pdf 1 page image

ATV/Motorcycle ComputerACE-1000/1100 User Manual123479MADE IN TAIWANRESET10R-029648RESET5 68PANEL DESCRIPTIONS1. Tachometer Scale2. Bar Tachometer3. Other functions4. Thermometer*5. RESET Button6. MODE Button7. Fuel Gauge8. RPM Warning Indicator9. Temperature*/Fuel gaugewarning LEDFUNCTIONSSPECIFICATIONSPower InputTachometer SensorTemperature Sensor*Power ConsumptionDimensionsDC 12VCDI or Ignition Coil SignalThermo Sensor50uA at clock mode1mA at on status without backlight and all sensors off2mA at all sensors on status without backlight15mA at on status with 3 sec. backlight25mA at on status with continue backlight110.0mm x 55.0mm x 21.5 mm)Function SpecificationsSimboloBar Tachomete 500-10,000 rpm1,000-20,000rpm options100-19,900rpmTotal Hour Meter 0-999999HDigital TachometerMaintain Reminder 1-9999 hoursHour meter 1&2 0-99H59`59``100Ω, 250Ω, 500Ω options or1-7 Bar-graphicMaximum Thermometer*Voltage Gauge* V 8.0-18.0 VoltDigital Thermometer*rpm12/24 Hour Clock 0:00`-11H59`/23H59`RT 1&2Bar-Fuel GaugeRT1or RT210R-029648RPM sensing wire mounting:1. Signal intensity from ignition coil is dependent on vehicle type.2. Circles 2-5 turns around ignition coil, with more turns creatingsteadily stronger signal, fewer turns creating weaker signal.3. The RPM circuit is designed for most bikes, however partialbikes’ signal is too strong if the RPM looks like much more thanactual RPM and unstable, please serial connect the attached 1MOhm resistor to solve it.2-5CDI Ignition CoilTunsRPM-INPUTEither OneThermo Sensor and Sensor Tube* :1. The unit includes a water temperature sensor; you have topurchase a suitable water pipe temperature sensor tube toinstall the sensor easily. It is not need to purchase sensortube in case your bike matches PT1/8 temperature sensorand the attachment is PT1/8 sensor.2. Cut the water pipe, insert the temperature tube into thepipe and secure it by attached pipe clamps.3. Screw the sensor into the tube.BAR RPM: Bar Graphic TachometerThe bar tachometer has 10,000rpm and 20,000rpm options.RPM: Digital Tachometer1. It displays digital tachometer up to 19,900RPM.2. Tachometer signal can pick up from either CDI orIgnition Coil Signal.Shift Warning RPM1. The function enables you to set up a shift warning RPM.2. Shift warning LED indicator flashes when RPM reachessetting value, and stop flash after you shift gear.RT 1&2: Hour Meter 1&21. Calculates total engine operation time from last RESET.2. Count automatically begins with engine starting.TT: Total Hour Meter1. Calculates total engine operation time from thebeginning of the computer.2. TT data is stored in memory, and couldn’t be reset.: 12/24 hour ClockIt displays 12 or 24 hour current time.: Digital Thermometer*1. The thermometer always displays on the right side of the screen.2. It displays -L- C or -L- F when temperature is lower than50 C or 122 F, and displays -H- C or –H- F whentemperature is over 180 C or 356 F.3. The thermometer digits and warning LED indicator flash whenthe thermo sensor detects temperature over the presettingwarning temperature.FEATURESDisplays bar-graphic tachometer, digital thermometer*,bar fuel gauge and one additional function at the same time.Bar-graph tachometers with selectable 10,000rpm or20,000rpm redline.Two sets of maintenance reminders to remind you it is time to serviceyour bike.Fuel gauge includes 100, 250 and 510 Ohm options for fuel meterinput resistance, as well as “fuel gauge off” mode.Includes main unit, bracket, RPM sensing wire, thermo sensor*,fitting kits and wiring harness.Thanks for bought the ATV/Motorcycle computer; this manual is designed for ACE-1000/1100 series.ACE-1000 does not have functions of thermometer and volt meter; *all descriptions relative to these functions are for ACE-1100 only.EnglishINSTALLATIONRubber PadWasherSpring WasherFixing Screw NutMain UnitMountingMain Unit Mounting

/ 3

Related manuals for Acewell ACE-100-