Acewell ACE-3200 Series User Manual

Acewell ACE-3200 Series User Manual Manual pdf 1 page image

Thanks for purchsaing an Acewell ATV/Motorcycle/Scooter computer. Thismanual is specifically designed for ACE-3200/39XX-AX series. The ACE-3200-AX does not have any extra LED indicator. The ACE-39XX series has 4-8 LEDindicators. Different models have different LED indicators. You may find that thephoto has a set of LED indicators different from your computer; the photo is forreference only.ATV ComputerACE-3200/39XX-AX series User's Manualwww.acewell-meter.comIncludes analog and digital tachometer, temperature meter, speedometer(300km/h maximum), trip meter, odometer, clock, average speedometer,maximum speedometer, riding timer and cumulativel riding timer.Computer unit has 4-8 built-in LED for different-purpose indicators.LCD has 2 rows of digital and one analog bar-graphic tachometer displays, withblue LED backlight.Odometer and cumulative riding timer measurements are stored in memory,even when power is off.The computer's clock display is always on, even when other functions arepower-off.Adjustable wheel circumference suitable for all kind of wheels: setting range of1-3999 mm setting.Metric/ British system options.Waterproof designFEATURESSPECIFICATIONSPANEL DESCRIPTIONSLeft-Direction Indicator/GreenMain-Beam Headlamp/BlueRight-Direction Indicator/GreenHazard Warning/ RedParking/GreenDirection Indicator/GreenEngine Oil / RedNeutral Gear /GreenReverse Gear /RedDrive Gear /GreenEngine coolant temperature/ RedPDRNRear Fog Lamp/AmberTrailer Flashers/GreenFUNCTIONSINSTALLATION & PARTSMain Unit MountingSpeed Sensor & Magnet MountingRPM Sensor MountingFixing Screw NutRubber PadWasherSpring WasherAttention1.Align the center of the magnet toeither of the sensor marking lineor the end of the sensor.2.Installing the sensor parallel tothe vibration direction createsoptimal anti-vibration effect.3.Make sure the gap between the magnetand the sensor is within 8mm.Max8mmVibration DirectionsensorMax8mmVibration DirectionsensorCDI Ignition CoilRPM-INPUTEither One2-5 Turns1. Tachometer Scale2. Bar Tachometer3. 1st row display: Speedometerand Temperature meter.4. 2nd row display: Other functions5. RESET Button6. MODE Button7. LED Indicator symbolsEngine "Not In Use"/Red1. Signal intensity from ignition coil is dependent on vehicle type.2. Circles 2-5 turns around ignition coil, with more turns creatingsteadily stronger signal, fewer turns creating weaker signal.BAR RPM: Bar Graphic Tachometer1. The bar graphic tachometer reading is always displayed at the bar graph.2. Tachometer bar graphic displays up to 11,000 RPM.RPM: Digital Tachometer1. RPM is displayed in 2nd row.2. Digital tachometer displays up to 19,900 RPM.3. Tachometer signal picked up from either CDI or Ignition coil.Shift Warning RPM1. Function enables you to set up an RPM shift warning.2. Bar-graphic tachometer flashes when RPM reaches pre-set value, andstops flashing after you shift gear.MAX RPM: Maximum Tachometer1. MAX RPM is displayed on 2nd row.2. Displays highest tachometer reading achieved after last RESET operation.SPD: Speed Meter1. Speed meter display is on 1st row of the screen.2. Displays speedometer reading up to 300.0 Km/H or 187.5 mph.MAX: Maximum Speed Meter1. MAX is displayed on 1st row.2. Displays highest speed achieved after last RESET operation.AVG: Average Speed Meter1. Calculates average speed from last RESET.TRIP 1 & 2: Trip Meter 1& 2TRIP function registers cumulative trip distance from last RESET while bike isbeing ridden.ODO: Odometer1. ODO registers cumulative distance traveled during motorbike operation.2. ODO data is stored in memory, even when power is off.RT: Riding Timer1. Calculates total operation time from last RESET.2. Count automatically begins with vehicle movement.TT: Total Riding Timer1. Calculates total operation time from the beginning of bike use.2. Count automatically begins with vehicle movement.3. TT data is stored in memory, even when power is off.12/24 hour ClockIt displays 12- or 24-hour current time.: Temperature Meters1. It displays -L- or -L- when temperature is lower than 50or -H- when temperature is over 1602. The LCD screen will automatic change to temperature screen and flashes thedigits of temperature when the thermo sensor detects temperature over thepresetting warning temperature; The MODE key is out of function until thetemperature cooling down and lower than the presetting waring temperature.MAX : Maximum Temperature MeterDisplays highest temperature achieved after last RESET operation./Power Input: 12VDC.Speed Sensor: Reed Sensor or Hall SensorTachometer Input: CDI or Ignition-coil signal.Temperature Sensor: Thermo SensorWheel Circumference setting: 1mm - 3999 mm (1 mm increment)Operation Temperature: -10 - +80 (inner housing)Storage Temperature: -25 - +85 (Inner housing)1 Second1 Minute9999H59'0:00'00"- 99:59'59"Riding TimeTotal TimeSPECIFICATIONS2.3-300.0KM/h (187.5M/h)MAX 2.3-300.0KM/h (187.5M/h)AVG 2.3-300.0KM/h (187.5M/h)0.0-999.9 Km (624.9 Miles)0.0 - 999999 Km (0.0- 624999 Miles)500-11,000 rpmBar TachometerOdometerTrip Meter 1&2Maximum Speed MeterSpeed MeterSymbolFUNCTION500 rpm1 Km or Miles0.1 Km or Miles0.1 KM/H or MPH0.1 KM/H or MPH0.1 KM/H or MPHINCREMENTS50PPM1% or0.1(KPH/MPH)0.1%0.1%50PPMACCURACYAverage Speed Meter 1% or0.1(KPH/MPH)1% or0.1(KPH/MPH)TTRTODOTRIP 1&2AVGMAXDigital Tachometer RPM 100-19,900rpm 100 rpmShift WarningMaximum Tachometer MAXRPMRPM 100-19,900rpm100-19,900rpm100 rpm100 rpmClock 0:00'00"- 23:59'59" 1 Second /1 Minute 50PPMTemperature /E 13 10R-022812.7.2. 1.3.4.5. 6.

/ 2

Related manuals for Acewell ACE-3200 Series