Acewell ACE1 Series User Manual
ATV/Motorcycle ComputerACE1XX User Manual2164 5Speed Sensor:The ACE-1XX can use either a 2 wire hall sensor or a reed sensorwhen it is connected to the bike’s power.1. 1 row: Speedometer2. 2 row: Trip 1&2, RT, AVG3. Fuel Gauge: 1-7 bar-graphic display4. RESET Button5. MODE Button6. LED IndicatorsstndFEATURESDigital LCD displays multi-functions ATV/Motorcycle and Scootercomputers.Built-in 3 LED indicators for different applications and backlight.Odometer and total riding timer are always kept in memory.Metric/Empire unit options are available.Adjustable wide wheel circumference setting from 1 to 3999mm.Fuel gauge includes +/- 100, 250 and 510 Ohm options for fuel senderinput resistance, as well as “fuel gauge off” mode.Includes bracket, speed sensor, fitting kits and wiring harness.SPECIFICATIONSPower InputSpeed SensorWheel circumference settingDimensionsDC 9-18VReed Sensor or Hall sensor with 2 wires1mm-3999mm96.7mm x 53.9mm x 24.5 mmFunction SpecificationsSimboloSpeedometer 2.4-399.9 km/h(248 MPH)0.0-999.9 KM/MilesMaximum speed 2.4-399.9 KM/h (248 MPH)Trip meter 1&2Riding timer 0-99H59`59``+/- 100Ω, 250Ω, 500Ω options and OffTotal Riding Time 0-999999HOdometerTRIP 1/212/24 Hour Clock 0:00`-11H59`/23H59`RTBar-Fuel GaugeKm/H /MPH0- 999999 KM, 0-624999 MilesODOAverage speed AVG 2.4-399.9 KM/h (248 MPH)MAXT TINSTALLATIONRubber PadWasherSpring WasherFixing Screw NutReed Speed Sensor and Magnet:1. This sensor is universal sensor for motorcycle, find a rotating partto install magnet (for example disk, sprocket or driveshaft) and alocation to install the sensor where it can be aligned to the magnet.2. Align the center of the magnet to either of the sensor marking linesor the side of the sensor.3. Installing the sensor parallel to the vibration direction createsoptional anti-vibration effect.4. Make sure the gap between the magnet and the sensor iswithin 8mm.Hall Effective Speed Sensor and Magnet:1. This is universal sensor for ATV front or rear wheel installationor motorcycle front wheel installation. For some fitments anaccessory speed sensor holder may need to be purchased.2. Find a rotating part to install magnet (for example disk, sprocketor driveshaft) and a location to install the sensor where it can bealigned to the magnet3. Align the center of the magnet to center of side face of the sensor.4. Make sure the gap between the magnet and the sensor iswithin 5mm.Specific Hall sensors:Cable drive adaptors for most bikes originally fitted with cabledriven speedometers or milemeters are available. When using thesecables it is necessary to divide the circumference setting by thenumber of rotations of the cable per rotation of the wheel.Left-Direction Indicator/GreenMain-Beam Headlamp/BlueRight-Direction Indicator/GreenHazard Warning/ Red Direction Indicator/GreenEngine Oil / RedNeutral Gear /GreenReverse Gear /RedRNThanks for purchasing this ATV/Motorcycle/Scooter computer; this manual is designed for ACE-1XX series. Each model has 3 LED indicators.Different model has different LED indicators. You may found above photo has different LED indicators from your computer; the photo above is for reference only.3Max. 8mmVibration DirectionsensorMax. 8mmVibration DirectionsensorMax. 8mmMain Unit MountingMain UnitMountingPANEL DESCRIPTIONSEnglish10R-039949 |
Related manuals for Acewell ACE1 Series
Acewell ACE-6 Series User Manual
Acewell ACE-43 Series User Manual
Acewell ACE-3200 Series User Manual
Acewell MD-052-2 Series User Manual
Acewell CV080 2 Series User Manual
Acewell ACE-325X-XX series User Manual
Acewell MD-052-2XX Series User Manual
Acewell ACE-2XX User Manual
Acewell ACE-100- User Manual
Acewell ACE-1500 User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine