Acewell CV080 2 Series User Manual

Acewell CV080 2 Series User Manual Manual pdf 1 page image

Motorcycle/Car/ATV ComputerCV080-XX2 User ManualThanks for purchasing the ATV/Motorcycle/scooter/vehicle computer; thismanual is specifically designed for CV080-XX2 series.LED IndicatorsCV080-XX2 RPMLCD SymbolsCV080-XX2/XX3 SDifferent model with different needle tachometer or speedometer scales areas below:CV080-12X: 120MPHCV080-16X: 160MPHCV080-22X: 220km/hCV080-28X: 280km/hCV080-30X: 6,000rpmCV080-40X: 9,000rpmCV080-50X: 12,000rpmCV080-60X: 15,000rpmPANEL DESCRIPTIONS1. Tachometer or Speedometer Scale 6. RESET Button2. Needle Tachometer /speedometer 7. MODE Button3. 1st row: Digital Speedometer 8. Bar Fuel or Temperature gauge4. 2nd row: Other functions 9. 7 LED indicators5. Gear Indicator 10. 6 LCD indicatorsFEATURES Needle tachometer or speedometer, integrated digital functions, 7 LEDindicators and 7 LCD indicators. Negative VA LCD displays digital functions of speedometer, tachometer,maximum RPM and SPD, average speed, trip meter 1/2 or 3, odometer,riding time, total riding time, total hour meter, volt meter, temperaturemeter, clock, bar-fuel and temperature gauge. 5 level backlight brightness can be manual adjust from 5, 6, 7, 8, 9. Gear indicator which calculates gear by comparing speed and RPM. Fuel gauge full and empty resistances are fully adjustable to becompatible with most fuel senders. Fuel gauge can be disabled if notrequired. Flexible battery warning voltage setting from 11.0 to 17.0V. Allows end user to adjust odometer when the odometer is less than 30km/ 18.6 miles Odometer and total riding time are stored in memory, even when thepower is off. Universal wheel circumference setting range from 1 to 3,999mm. Includes bracket, RPM sensing wire, hall or reed speed sensor, fitting kits,wiring harness and temperature sensor. Excellent water resistant, anti-vibration structure and noise immunitydesign.SPECIFICATIONSFUNCTIONS SYMBOL SpecificationsDigital Tachometer rpm 100-19,900 rpm,Speedometer km/h / MPH 2.4-399 km/h (248 MPH)Maximum speed MAX SPD 2.4-399 km/h (248 MPH),Average speed AVG SPD 2.4-399 km/h (248 MPH),Temperature Meter ℃/℉ 0℃-180℃ / 32℉-356℉, HI or oFF<0℃ display -L-, >180℃ display -H-Max. Temperature MAX ℃/℉ 0℃-180℃ / 32℉-356℉Trip meter 1/2 TRIP 1/2 0.00-999.99 km /624.99MilesTrip meter 3 TRIP 12 999.99-0.00 km /Miles count downOdometer ODO 0-999.99 km, 0-624999 Miles12/24 Hour Clock AM/PM AM/PM 0:00’ – 11H59’ / 23H59’Riding timer RT 0-99H59`59``Total Riding Time TT 0-99999.0HTotal Hour meter HRTT 0-99999.0HVoltage Gauge V 9.3-18.0 Volt and battery warningsGear indicator N, R, 1, 2,…8 gears and off modeMaintain reminder Trip orHRT0~9999km (6213Miles), 9999 hoursor oFFBar-Fuel orTemperature Gauge Or 1-5 Bars, Adjustable 10Ω -999Ω,reserve mode, or not displayedPower Input DC 9.3-18.0VTachometer Sensor CDI, Ignition Coil Signal or ECUSpeed Sensor Reed or hall SensorTemperature Sensor PT-1/8” Thermistor SensorSpeed input divider setup 1-199 PulsesMaximum speed input frequency 5K HzWheel circumference setting 1mm-3999mmDimensions Ø80*51.5mmINSTALLATION & PARTSMain Unit Installation:Main UnitSleeve of main unitBracketRubber padWasherNutScrewRPM sensor mounting:1. Connect the yellow or grey wire to sense the RPM signal.2. The yellow wire can be wrapped around the spark plug lead or can beconnected to the primary side of the coil or to the pulse wire on an activespark plug cap.a. Signal strength from the ignition coil is dependent on coil type.b. Coil 3-5 turns around spark plug lead, the more turns the stronger thesignal. A weak signal will not show a reading on the screen whereas avery strong signal will have a reading which is too high or very jittery.If the reading is incorrect then try putting the 1MΩresistor which isincluded in the box inline in the sensor wire.c. Connects to the primary side of the coil or to the pulse wire on anactive spark plug cap if the signal of wrapped around the spark plug isstill unstable.3. If the signal is still unstable, please try to connect the grey wire to the ECUrev counter output.Speed SensorMounting:

/ 4

Related manuals for Acewell CV080 2 Series