Acewell ACE-43 Series User Manual

Acewell ACE-43 Series User Manual Manual pdf 1 page image

ATV/Motorcycle ComputerACE-4XXX-XX User Manual10R-029702PANEL DESCRIPTIONS1. Tachometer Scale2. Needle Tachometer3. 1st row: Current &Max.Speedometer4. 2nd5. Temperature 1 &28. RPM Warning Indicator9. 12/24 Hour Clock10. Bar Fuel gauge11. LED indicators12. Gear indicatorsFUNCTIONSRPM: Digital Tachometer1. It displays digital tachometer up to 19,900RPM.Coil Signal.Shift Warning RPMMAX RPM: Maximum TachometerKm/H or MPH: Speedometer1. Displays speed meter up to 399.9 Km/H or 248.5 MPH.3. The speed can be less than 399.9 KM/H in case the setup is usingwheel circumference at 1277mm.MAX: Maximum Speed MeterAVG: Average Speed MeterIt calculates average speed from last RESET. The AVG is calculatedfrom TRIP be divided by RT.TRIP 1&2: Trip Meter 1&2as bike/vehicle is moving.ODO: Odometer1. ODO accumulates total distance traveled.that it stored in memory and cannot be reset.RT: Riding TimerTT: Total Riding Timer2. TT data is stored in memory, and couldn’t be reset.: 12/24 hour ClockFEATURESAluminum CNC main unit built-in 4-6 LED indicators for differentDisplays needle tachometer, speedometer, clock, Coolant or airDigital tachometer is up to 19,900rpm regardless of the needletachometer scaleAllows end user to adjust his/her prefer backlight color.speed sensors.Allows end user to adjust odometer when the odometer is lessthan 30km / 18.6 milesmeter input resistance, as well as “fuel gauge off” mode.Includes bracket, RPM sensing wire, speed sensor, thermo sensor,127689101135412sensor sensorMAX 8mm MAX 8mmSpecific Hall sensors:The sensor such as Honda CRF, XR….etc. can replace original sensor cableHall Effective Speed Sensor and Magnet:holder.and the sensor can be aligned to the magnet.3. Align the center of the magnet to center of side face of the sensor.4. Make sure the gap between the magnet and the sensor is within 5mm.CoilCDIRPM Input ,Either one2-5 TunsINSTALLATION & PARTSRPM sensor mounting:3. The RPM circuit is designed for most bikes, however some bikes’signal is too strong if the RPM looks like much more than actualRPM and unstable, please serial connect the included 1M Ohmresistor in series to solve it.Speed Sensor:ACEWELL has several speed sensors; the unit may include one of them.If the model is intended to be connected to a gearbox electronic speedoutput to obtain the speed reading, no speed sensor will be included.Reed Speed Sensor and Magnet:2. Align the center of the magnet to either of the sensor marking linesor the side of the sensor. The magnet must not travel down thebody of the sensor4. Make sure the gap between the magnet and the sensor is within 8mm.Main Unit Installation:RubberWasherFixing Screw NutBoltMain Unit MountingBUTTON OPERATIONSMODE ButtonModeModeModeModeModeModeModeModeModeLAP: Lap TimerFuel Bar & Resistor ValueBars -510-250-100510r250r100r76543210-Flash0-1011-2021-3536-4546-6061-7576-9091-1000-2526-5051-8586-110111-150151-200201-230231-2500-5051-100101-180181-230231-300301-380381-460461-510100-9089-7574-6059-4544-3534-2019-109-0250-230229-200199-150149-110109-8584-5049-2524-0510-460459-380379-300299-230229-180179-10099-5049-0TEMP 1: Engine Temperature Meter1. It displays -L- C or -L- Fwhen temperature is lower than 50 C or 122 F,and displays -H- C or –H- F when temperature is over 180 C or 356 F.2. The LCD screen flashes the digits of temperature when the thermosensor detects temperature higher than the maximum presettemperature.TEMP 2: Air TemperatureIt displays air temperature from -20 C (-4 F ) to+60 C (+140 F).MAX TEMP 1: Maximum TemperatureVolt: Digital Voltage Gauge: Fuel Gauge1. Has 7 bars to indicate how much fuel remains.2. Built-in 100, 250, 510Ohm, oFF, -100, -250 and -510 Ohm fuel senderresistance, the fuel bars will disappear when you select “oFF” mode.3. The full bars are low resistance and empty bar is high resistance for100, 250 and 510ohm; -100, -250 and -510 ohm are the inverse.Thermo Sensor and Sensor Tube:1. The unit includes a water temperature sensor; you have to purchasea suitable water pipe temperature sensor tube to install the sensor easily.2. Cut the water pipe, insert the temperature tube into the pipe and3. Screw the sensor into the tube.ACE-43XX-XX : 6,000 rpmACE-44XX-XX : 9,000 rpmACE-45XX-XX : 12,000 rpmACE-46XX-XX : 15,000 rpmEnglishThanks for purchasing the ATV/Motorcycle computer; this manual is specifically designed for ACE-4XXX-XX series.Different series have different needle tachometer scales, each series has different models, each model has different LED indicators.You may find that the photo has a set of LED indicators different from your computer, the photo is for reference only.SPECIFICATIONSFunction SpecificationsSimboloNeedle Tachometer ACE-43XX-XX 6,000rpmACE-44XX-XX 9,000rpmTotal Riding TimeDigital TachometerRiding timerMax. TemperatureVoltage Gauge Vrpm12/24 Hour ClockRTBar-Fuel Gauge*1, 2,…8 gears and off modeSpeedometer Km/h/ MPHMaximum speed MAXAverage speed AVGCoolant temperature TEMP 1Air temperature TEMP 2MAXTEMP 1Trip meter 1&2 TRIP 1&2Odometer ODOLAPGear indicators100-19,900rpm0-999999H0-99H59`59``100Ω, 250Ω, 500Ω options or1-7 Bar-graphic8.0-25.0 VoltAM/PM 0:00`-11H59`/23H59`2.4-399.9 Km/h (248.5 MPH)2.4-399.9 Km/h (248.5 MPH)2.4-399.9 Km/h (248.5 MPH)+50 C-180 C / 122 C-356 C<50 C display -L-, >180 C display -H-20 C-+60 C / -4 F-140 F+50 C-180 C / 122 F-356 F<50 C display -L-, >180 C display -H-0.0-999.9 KM /624.9Miles0.0 - 999999 KM, 0.0-624999 Miles50 lapsLapTTACE-45XX-XX 12,000rpmACE-46XX-XX 15,000rpmWire Remote Control Switch Installation:1. Install the switch arm on handlebar.2. Install the switch box to one of 3 fixing holes and adjust switch box to asuitable angle.3. Plug the switch box connector into the main unit matching connector.Different series with different needletachometer scales are as bellows:Different models have different LED indicators, each indicator symbol meansMain-beam headlamp/BlueHazard Warning/ RedParking/GreenEngine oil / RedNeutral Gear /GreenReverse Gear /RedDrive Gear /GreenEngine coolant temperature/ RedPDRNRear fog lamp/AmberFlash Trailer/Green Engine in out of use/ Redas below:: Gear Indicator1. The gear indicator calculates gear by comparing speed and RPM thendisplays gear position.2. User has to train the gear indicator before use it.

/ 2

Related manuals for Acewell ACE-43 Series