Acewell MD-052-2 Series User Manual

Acewell MD-052-2 Series User Manual Manual pdf 1 page image

6.5.1.2.3.4.7. 89..Motorcycle/Scooter ComputerMD-052-2XX/3XX User ManualThanks for purchasing the Motorcycle/Scooter computer.The user manual is designed for MD-052-2XX and MD-052-3XX series,functions and descriptions with “ ** ” are for MD-052-2XX only, functionsand descriptions with “ * ” are for MD-052-3XX only.Different LED combinations have different model numbers. You may findthe above photo has different LED indicators from your computer; the photoabove is for reference only.1. Tachometer Scale2. Bar Tachometer3. Speed & MAX speed4. Other functions display5. Push ButtonPANEL DESCRIPTIONSFEATURESSPECIFICATIONSFUNCTIONSMulti-functional LCD Motorcycle/Scooter computer displays speedometer,bar-graphic tachometer, ** fuel gauge or * temperature gauge, and one ofother function simultaneously.Integrates backlight and 6 LED lights for different purpose indicators.Built-in bar-graphic and digital tachometers and resettable shift warningindicator.On some models the backlight can be controlled separately from the ignitionpower.Allows end user to adjust odometer when the odometer is less than 30km /18.6 milesFast processor so can connect to pulse type gearbox speed sensors.**Fuel gauge includes +/-100Ω, 250Ω and 510 Ω options for fuel meter inputresistance, as well as “fuel gauge off” mode.*MD-052-3XX series includes a temperature sensor for temperature gauge.Odometer and total riding timer are stored in memory, even when the poweris off.Universal wheel circumference setting from 1mm to 3999mm.Includes speed sensor, magnet, RPM sensing wire, fitting kit, wiring harnessand *temperature sensor.Excellent water resistant, anti-vibration structure and noise immunity design.Power Input DC 8-18VSpeed Sensor Reed or 2 wires Hall-effect SensorTachometer input CDI or Ignition Coil SignalWheel circumference setting 1mm-3999mm (1mm increment)Temperature sensor PT1/8” thermistor sensorDimensions Ø52*45.1mmOperation Temperature: -20°C - +80°C (inner temperature)Storage Temperature: -30°C - +85°C (Inner temperature)Functions Symbol Specifications MD52-2XX MD52-3XXBar tachometerDigital TachometerMax. RPMSpeedometerTrip MeterOdometerMaximum SpeedAverage Speed12/24 Hour ClockTotal Hour MeterRiding TimerTotal Riding Timer**Bar-Fuel meterVolt meter*Temperature meter*MAX Temperature* Bar Temperature meter12,000 rpm,100-19,900 rpm, 100rpm increment100-19,900 rpm, 100rpm increment2.4-300.0 km/h (187.5MPH)0.0-999.9 KM/Miles0 - 999999 KM, 0-624999 Miles2.4-300.0 KM/h (187.5 MPH),2.4-300.0 KM/h (187.5 MPH),0:00’00” – 11H59’59”/23H59’59”0-9999H59’0-99H59`59``0-9999H59’,1-7 bars, +/-100, 250, 510Ω and off mode.8-18VDC0 °C-180 °C / 32 °F-356 °F0 °C-180 °C / 32 °F-356 °F1-7 bars and Off mode.RTHRTTTTRPMMAX RPMODOTRIPMAXAVGVKm/h / MPHMAX °C or °F°C or °FFuel Bar76543210-Flash100Ω0~1011~2021~3536~4546~6061~7576~9091~100250Ω0~2526~5051~8586~110111~150151~200201~230231~250510Ω0~5051~100101~180181~230231~300301~380381~460461~510-100Ω100~9089~7574~6059~4544~3534~2019~109~0-250Ω250~230229~200199~150149~110109~8584~5049~2524~0-510Ω510~460459~380379~300299~230229~180179~10099~5049~0: Bar Graphic Tachometer1. The bar graphic tachometer is always displayed.2. It displays bar graphic tachometer up to 12,000RPM.RPM: Digital Tachometer1. It displays digital tachometer up to 19,900RPM and displays19,999rpm when tachometer is over 20,000rpm.2. Tachometer signal can pick up from either CDI or Sparking plug wesuggest to circle round 2-5 turns on CDI or Plug cable.3. It has 2 wires to pick up RPM signal, the yellow wire is to connect toPlug, and blue wire is for signal from ECU or Ignition coil, only use 1of the wires.Shift Warning RPM1. The function enables you to set up a shift warning RPM.2. Bar-graphic tachometer flashes when RPM reaches setting value,and stop flash after you shift gear.MAX RPM: Maximum Tachometer1. MAX RPM is displayed at the 2nd row.2. Displays highest tachometer achieved after last Reset operation.SPD: Speed Meter1. Speed meter display is at the 1st row of the screen2. Displays speed meter up to 300.0 Km/H or 187.5 mph.MAX Km/h or MPH: Maximum Speed Meter1. MAX is displayed at the 1st row.2. Displays highest speed achieved after last Reset operation.AVG: Average Speed Meter1. AVG is displayed at the 1st row.2. It calculates average speed from last RESET. The AVG is calculatedfrom TRIP be divided by RT.TRIP: Trip Meter1. TRIP function accumulates trip distance from last RESET as long asbike is being ridden.2. Display is on the 2nd row of screen.ODO: Odometer1. ODO accumulates total distance traveled.2. ODO data is adjustable when it is less than 30km (18.6 Miles), afterthat it stored in memory and cannot be reset.HRTT: Total Hour Meter1. Calculates total engine operation time since installation.2. Counting automatically begins with engine starting.3. HRT data is stored in memory, and cannot be reset.RT: Riding Timer1. Calculates total operation time since last RESET operation.2. Counting automatically begins with movement.TT: Total Riding Timer1. Calculates total operation time since installation.2. Counting automatically begins with movement.3. TT data is stored in memory, even when the power is off.: 12/24 hour Clock1.Displays 12 or 24hour current time.** : Fuel Meter (Only for MD-052-2XX series)1. Has 7 bars to indicate how much fuel remains.2. Built-in 100, 250, 510Ohm, oFF, -100, -250 and -510Ωfuel senderresistance, the fuel bars will disappear when you select “oFF” mode.3. The full bars are low resistance and empty bar is high resistance for100, 250 and 510ohm; -100, -250 and -510 ohm are the inverse.4. Last bar and LED flash to indicate low fuel level7. Shift warning indicator8. Indicator of ** low fuel or *overtemperature9. LED indicators6. ** Fuel bar or *Thermo meterINSTALLATION & PARTS* ˚C or ˚F: Temperature Meter1. It measures and displays from 0 to 180 (32-356).2. It displays -L- or -L- when temperature is lower than 0 or disconnectedtemperature sensor, and displays -H- or –H- when temperature is over180 or 356.3. The bar-temperature and digits of temperature and temperature LEDindicator flash when the thermo sensor detects temperature higher than themaximum preset temperature.4. The 4th bar of the temp bar chart counting from the bottom turns on whentemperature reaches the preset warning temperature, each +/-15 lightson/off a bar based on the 4th bar.Speed decimal option:1.User can decide to display speed to 1 or 0.1 mph / km/h.2.Follow the item 10 of set up mode to option the decimal of speedometer.V: Digital Voltage GaugeIt checks bike’s battery and charging systems health and displays battery /charging voltage.*MAX ˚C or ˚F: Maximum Temperature1. It displays at the 1st row of LCD.2. Displays highest temperature achieved since last Reset operation.Main Unit Installation:Spring WasherWasherRubber PadBracketFixing Screw NutMain UnitRPM sensor mounting: RPM Input,1.Connect either the yellow or white wire to sense the RPM signal.2.The yellow wire can be wrapped around the spark plug lead.a.Signal intensity from ignition coil is dependent on vehicle type.b.Coil 2-5 turns around spark plug lead, with more turns creatingsteadily stronger signal, fewer turns creating weaker signal.3.If the yellow wire be wrapped around the spark plug lead works notstable, please try to connect the white wire to either the ECU revcounter output or to the primary side of the coil.Speed Sensor Mounting:ACEWELL has several speed sensors; the unit may include one ofthem. If the model is intended to be connected to a gearboxelectronic speed output to obtain the speed reading, no speedsensor will be includedReed Speed Sensor and Magnet:1. This sensor is universal sensor for motorcycle, find a rotatingpart to install magnet (for example disk, sprocket ordriveshaft) and a location to install the sensor where it can bealigned to the magnet.2. Align the center of the magnet to either of the sensor markinglines or the end of the sensor. The magnet must not traveldown the body of the sensorHall Effective Speed Sensor and Magnet:1. This is universal sensor for ATV or motorcycle front or rear wheelinstallation. For some fitments an accessory speed sensor holder mayneed to be purchased.2. Find a rotating part to install magnet (for example disk, sprocket ordriveshaft) and a location to install the sensor where it can be alignedto the magnet3. Align the center of the magnet to center of side face of the sensor.4. Make sure the gap between the magnet and the sensor is within 5mm.Max. 8mmVibration DirectionsensorMax. 8mmVibration DirectionsensorSpecific Hall sensors:Cable drive adaptors for most bikes originally fitted with cabledriven speedometers or odometers are available. When usingthese cables it is necessary to divide the circumference setting bythe number of rotations of the cable per rotation of the wheel.*Thermo Sensor and Sensor Tube:1. The unit includes a water temperature sensor; you may have topurchase a suitable water pipe temperature sensor tube to installthe sensor on some bikes.2. Cut the water pipe, insert the temperature tube into the pipe andsecure it by attached pipe clamps.3. Screw the sensor into the tube.4. If your vehicle is fitted with a thermostat that stops waterflowing to the radiator when the engine is cold, you will not get areading until the thermostat opens.5. Custom sensors are available for carbureted bikes to replace theoriginal sensor.3. Installing the sensor parallel to the vibration direction createsoptional anti-vibration effect.4. Make sure the gap between the magnet and the sensor iswithin 8mm.10R-0312653Left direction indicator/GreenMain-beam headlamp/BlueRight direction indicator/GreenHazard Warning/ RedParking/GreenDirection indicator/GreenEngine oil / RedNeutral Gear /GreenReverse Gear /RedDrive Gear /GreenEngine coolant temperature/ RedPDRNRear fog lamp/AmberFlash Trailer/Green Engine in out of use/ Red

/ 2

Related manuals for Acewell MD-052-2 Series