Adaptec 1742A User Manual

Contents

If Error if Device Not Found is enabled, through the EISA Con-figuration utility, then you will see a screen similar to the oneshown below:By default, removable media disk drives are not installed by theadapter BIOS. To have removable media installed by the adapterBIOS, select the fr option from the EISA Configuration utility.Generally, this should not be done. The adapter BIOS, in eitheroperation mode, does not support the removing of media duringsystem operation. If the media is removed while the system isoperating data loss could occur. Removable media (under DOS)should be installed with Adaptec ASPI software.pAdaptec AHA-1740 BIOS v1.34Copyright 1991 Adaptec, Inc.[Standard Mode]Target 0 - QUANTUM P40S 940-40-94XX - Drive C: (80h)Target 1 - Device not found!Target 2 - CONNER CP340 (40mb 3.5) - Drive D: (81h)Target 3 - Device not found!Target 4 - CHINON CD-ROM CDS-431Target 5 - Device not found!Target 6 - Device not found!Figure 6-3. Boot Message With Error Detection Enabledadaptec AHA-1740A/1742A/17446-4