Adeunis RF sigfox Repeater RC1 User Manual
Also see for sigfox Repeater RC1: Technical reference manual
                                             | |
Contents
| 
sigfox Repeater - Guide utilisateur / User guide version 1.0.014Page of 45ENFR2.1. Activating the repeaterBy default the repeater is in PARK mode. In order to be configured & used, it needs to be activated. For this, a magnet is needed. The followingsequence has to be followed:NOTE: the magnet must be maintained until the GREEN LED lights up. Otherwise, start again.The magnet zone is shown on paragraph « 6.3 Starting up the product using a magnet ».Once the product has been activated, it switches to installation mode.2.2. Installation modeOnce in installation mode, both LEDs blink simultaneously every 500ms:The repeater now awaits configuration, which should be done with the «adeunis sigfox Repeater App», available on Windows and Androidplatforms.MODE PARCMODE DEADMODE OPERATIONMODE INSTALLATIONProduct has never been used. It awaits activation and does nothing in themeantime.Product has been activated.It awaits configuration from the user.Product has been configured and is now in normal state of operation.Battery pack is dead and needs to be replaced2. ACTIVATION PROCESS AND CONFIGURATIONThe product has 4 main states of operation: |
Related manuals for Adeunis RF sigfox Repeater RC1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine