Adeunis RF sigfox Repeater RC1 User Manual
Also see for sigfox Repeater RC1: Technical reference manual
                                             | |
Contents
| 
sigfox Repeater - Guide utilisateur / User guide version V1.0.017Page of 45ENFRDefinition of a groupDepending on the site, the sensors can be scattered in different ways. It is impossible to cover all cases in the application, hence the notion ofgroup was introduced. An group of sensors can be defined as any number of sensors contained within a bubble of 50m radius:Topologies descriptionDifferent types of environment are identified:Type DescriptionOutdoor The device is placed in an open area, without specific obstructionLight indoor The device is placed indoor, in a not-too-harsh environment: near windows, outer walls, open-space type envi-ronment, floors where rooms are separated by light partitionsHard indoor The device is placed indoor, in an environment that contains heavy concrete / metal wallsDeep indoor The device is placed in underground-type environments (cellar, basement, etc.)Mixed Mix of either of the aboveUnknown /2.2.1.03 SetupThe setup section guides the user through the process of installation & configuration of the repeater.The sigfox Repeater has to be connected before going through this phase (see section 2.2.1.01).• Step 1: White List configuration1. Click on « Setup »2. Enter the IDs of the Refe-rence Transmitter you have inyour possession 3. In order to be repeated bythe repeater, the sensors IDshave to entered in a WHITE-LIST. IDs that are not in theWhite list will not be repeated |
Related manuals for Adeunis RF sigfox Repeater RC1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine