Advanced Bionics Platinum Series User Manual
Also see for Platinum Series: User guideTroubleshooting guide
                                        | |
Contents
| 
User Guide for the Platinum Series Sound Processor 25Using the Platinum Series Sound ProcessorGetting Started – Quick StepsIn order to use your processor, follow the steps below:1. Verify that the processor program switch is in the off position (o).2. Check that a charged battery or an AA battery pack has been correctly insertedonto the processor.3. Adjust the volume ( ) so that the indicator notch on the control is all theway to the left.4. Check the position of the sensitivity control ( ) so that the indicator notchon the control is at the 12:00 position.5. Check that the headpiece connector is properly plugged into the headpiecejack on the processor.6. Place the headpiece on your head over the implant.7. Turn the processor on by turning the program switch to the appropriate position(as determined by your audiologist). Note that the red LED indicator shouldblink 1-4 times to indicate the battery charge status.8. Verify that the red LED indicator on the processor stops flashing once successfulcommunication or “lock” is established with the implant.9. Readjust the volume and sensitivity controls as necessary. Adjustment of thecontrols may vary throughout the day depending upon the listening environment.WARNING: While no injury cases have resulted, components of the system maybecome hot during normal use or a fault condition. If a particulardevice’s temperature results in discomfort or pain, promptly removethe product and contact your local AB representatives.IMPORTANT: Use only the processor that has been programmed especially for you.Using a different processor, which has been loaded with a differentprogram, may be ineffective in providing sound information ormay cause physical discomfort.Be sure to turn the processor off before removing the headpiece.NOTE: Under limited circumstances, the cochlear implant system maycause interference with TV reception. Based on internal testingand field experience, there is no evidence that this interferencecauses safety-related hazards. Consult your programming centeror AB for assistance. |
Related manuals for Advanced Bionics Platinum Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine