32 User Guide for the Platinum Series Sound ProcessorHeadpieceTo Replace the Headpiece:• Turn the program control to the off (o) position.• Remove the headpiece from the cable by holding the cable at its strain reliefportion and gently pulling the cable away from the headpiece.• Insert the two-pin plug into the replacement headpiece. Take care to match thelarger pin on the plug to the larger hole of the headpiece connector.• Repeat the system check, steps 1-3.NOTE: Be sure the processor is turned off before removing the headpiece cable.When replacing the processor headpiece we recommend that you consult with yourprogramming center to verify proper headpiece fitting and sound quality adjustment.
