AIMB-540 User’s Manual 625.4.7 Integrated PeripheralsMain Section FunctionsConfigures the peripheral features integrated onto the motherboard.Default & Autodetected SettingsEverything on this screen is an optimized default. The IDE transfer modesettings are autodetected. The system will work with these defaults. Theport settings are standard PC settings.Setting Options & ConstraintsYou can disable onboard devices and change port settings. If you’re goingto use a USB keyboard or mouse, you have to enable support for themfrom this screen. You can disable the onboard audio and LAN features ifyou need to. The IDE HDD Block Mode feature should work with newerIDE hard disk drives.The Power On Function line sets what actions will turn the computer on.The default is just the power button, and there are several other options.The KB Power ON Password line lets you enter a password to protect theKeyboard Power On feature.CMOS Setup Utility-Integrated PeripheralsYou may want to set Onboard Serial Port 2 to Disabled if you aren’t goingto use the onboard COM2 port. If you install an IR port module, you haveto set the UART Mode Select line to the appropriate IR setting. Check themodule instructions for this information. The following four lines willdisplay the defaults for the IR mode you select and should work. You can
