24 PCM-4825/4825L User's Manual3.3 VGA display software configurationThe PCM-4825/4825L on-board VGA/LCD interface supports awide range of popular LCD, EL, gas plasma flat panel displays andtraditional analog CRT monitors. The interface can drive CRTdisplays with resolutions up to 1280 x 1024 in 16 colors. It is alsocapable of driving color panel displays with resolutions of 1024 x768. The LCD type is configured completely via the softwareutility, so you do not have to set any jumpers. Configure the LCDtype as follows:1. Apply power to the PCM-4825/4825L with a color TFT displayattached. This is the default setting for the PCM-4825/4825L.Ensure that the AWDFLASH.EXE and *.BIN files are locatedin the working drive.NOTE: Ensure that you do not run AWDFLASH.EXEwhile your system is operating in EMM386 mode.2. At the prompt, type AWDFLASH.EXE and press . TheVGA configuration program will then display the following:Figure 3-2: BIOS VGA setup screen
