76 PCM-4825/4825L User's ManualC.1 DiskOnChip®2000 quick installation guideC.1.1 DiskOnChip 2000 installation instructions1. Make sure the target platform is powered OFF.2. Plug the DiskOnChip 2000 device into its socket. Verify thedirection is correct (pin 1 of the DiskOnChip 2000 is aligned withpin 1 of the socket).3. Power up the system.4. During power up you may observe the messages displayed bythe DiskOnChip 2000 when its drivers are automatically loadedinto the system's memory.5. At this stage the DiskOnChip 2000 can be accessed as any diskin the system.6. If the DiskOnChip 2000 is the only disk in the system, it willappear as the first disk (drive C: in DOS).7. If there are more disks besides the DiskOnChip 2000, theDiskOnChip 2000 will appear by default as the last drive, unless itwas programmed as the first drive. (Please refer to the DiskOn-Chip 2000 utilities user manual.)8. If you want the DiskOnChip 2000 to be bootable:a - Copy the operating system files into the DiskOnChip by usingthe standard DOS command (for example: sys d:).b - The DiskOnChip should be the only disk in the systems orwould be configured as the first disk in the system (c:) using theDUPDATE utility.DUPDATE D /S DOC104.EXB /FIRST (set as c:)DUPDATE C /S DOC104.EXB (set as d:)
