Chapter 5 PCI SVGA Setup 61Multiple frequency (multisync) monitors are handled as if theywere analog monitors.5.2.2 Display memoryWith on-board 2 MB display memory, the VGA controller candrive CRT displays or color panel displays with resolutions up to1024 x 768 @ 64 K colors. With C&T 69030, the display memorycan be expanded to 4 MB for true-color resolution of 1024 x 768.5.2.3 Display typesCRT and panel displays can be used simultaneously. ThePCM-5864/L can be set in one of three configurations: on a CRT,on a flat panel display, or on both simultaneously. The system isinitially set to simultaneous display mode. The CD utility discincludes three *.COM files in the subdirectoryBiscuit\5864\Utility which can be used to configure the display.In order to use these configuration programs, type the file nameand path at the DOS prompt.CT.COM: Enables CRT display onlyFP.COM: Enables panel display onlySM.COM: Enables both displays simultaneously5.3 Installation of SVGA driverComplete the following steps to install the SVGA driver. Followthe procedures in the flow chart that apply to the operating systemthat you are using within your PCM-5864/E/L.Important: The following windows illustrations are examplesonly. You must follow the flow chart instructionsand pay attention to the instructions which thenappear on your screen.Note: means pressing the “Enter” key on thekeyboard.