72 PCM-5864/E/L User's Manual6.1 IntroductionThe PCM-5864/E/L's on-board Video-in and Video-out (TV-out)provides NTSC and PAL video standards. Video-in uses PhilipsSAA 7111A video input processor. TV-out uses Analog Device725AR. Video-in provides an 8-pin header connector for S-video.Alternatively, an optional cable kit provides an RCA yellow jackfor composite video input (see Appendix E). Video-out provides a6-pin header connector for S-video. Alternatively, an optionalcable kit provides an RCA yellow jack for composite video output(see Appendix E).6.2 Installation of video driverBefore installing the Video-in driver, please take note of theprocedures detailed below. You must know which operatingsystem you are using in your PCM-5864/E/L, and then refer to thecorresponding installation flow chart. Just follow the steps in theflow chart. You can quickly and successfully complete theinstallation, even if you are not familiar with instructions forWindows.Note: The CD-ROM drive is designated as "D" through-out this chapter.
