Axis 213 User Manual

Also see for AXIS 213: Installation guide Product instructions User manual Datasheet Installing

Axis 213 User Manual Manual pdf 12 page image

12 AXIS 213 - Installing the AXIS 213Manual Installation using ARP and Ping1. Acquire an unused IP address for the AXIS 213 from your network administratorthat is on the same network segment your computer is connected to.2. Locate the serial number (S/N) on the camera’s underside label.3. Open a Command Prompt on your computer. As appropriate for your operatingsystem, enter the following commands:4. Check that the network cable is connected. Start/restart the AXIS 213 bydisconnecting and reconnecting power, which must be done within 2 minutes ofentering the ARP command.5. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’ orsimilar.6. Start your browser, type in http:// in the Location/Address field andpress Enter on your keyboard.7. See Manual Installation using AXIS IP Utility, on page 10 for instructions on howto set the password.Notes: • To open a command prompt in Windows: from the Start menu, select Run... and type cmd (orcommand in Windows 98/ME). Click OK.• To use the ARP command on a Mac OS X, use the Terminal utility, which is found underApplication > Utilities.Windows syntax: Windows example:arp -s ping -l 408 -t Address>arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125UNIX/Linux/Mac syntax: UNIX/Linux/Mac example:arp -s tempping -s 408 Address>arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125