34 AXIS 213 - Configuring the AXIS 213PTZ Configuration - Preset PositionsA preset position is a pre-defined camera view than can quickly and easily be viewed.From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer thecamera to the required position. When satisfied with the camera's position, enter adescriptive name. This camera position is then saved as a preset position.The AXIS 213 will take the exactposition when the preset's name isselected from the Preset positionsdrop-down list. Preset positions canbe selected in Live View, fromevents and in Sequence mode.One position can be set as the Homeposition, which is readily accessibleby clicking on the Home button inboth the Preset Position Setupwindow and the Live View window.The position's name will have (H)added, e.g. Office Entrance (H).Sequence ModeThe Live View page can be configured to rotate through the selected preset positions,in a set order or randomly.Select the desired preset positions and enter the time to display each position. ClickSave.The Sequence buttons will appear on the Live View page to enable theviewer to start and stop the sequence mode.LimitsDefine the pan, tilt, zoom and focus limits for the AXIS 213. Movements to the leftand right, up and down can be restricted to narrow the area under surveillance.Move speed sets the speed of the camera's Pan/Tilt movements. The default setting ismaximum speed.