Axis 213 User Manual

Also see for AXIS 213: Installation guide Product instructions User manual Datasheet Installing

Axis 213 User Manual Manual pdf 13 page image

13AXIS 213 - Installing the AXIS 213The AXIS Internet Dynamic DNS ServiceThe AXIS Internet Dynamic DNS Service is a free service provided by Axis. Thisservice allows you to quickly and simply install your camera, which then receives astatic name (DNS name) and a dynamic IP address. More information about the AXISInternet Dynamic DNS Service is available at www.axiscam.netTo perform this procedure, your network should have an Internet connection with noHTTP proxy, and IP addresses should preferably be assigned via DHCP.Follow these instructions:1. After making the connections for network and power, wait for the Status indicatoron the front of the camera to show a steady green.2. Press the Reset button on the underside of the camera once. The Status indicatorflashes green while it connects to the AXIS Internet Dynamic DNS Service.3. Wait for the Status indicator to go back to showing a steady green.4. To complete the installation, now visit www.axiscam.net from an Internetconnected computer. This must be done within 60 minutes of pressing the Resetbutton.5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNSService. You will need the product’s serial number to complete the installation.See Manual Installation using AXIS IP Utility, on page 10 for instructions on howto set the password.Important!To remove the DNS name and unregister from this service, open the Setup pages inthe network camera, click System Options > Network > TCP/IP > Basic, click theSettings button for the AXIS Internet Dynamic DNS Service and finally, click theRemove button.Please note that this procedure will send the IP address, firmware version, product type, serialnumber and HTTP port number of the network camera to the AXIS Internet Dynamic DNS Ser-vice.No personal information is transferred.