NetWareSection 4: Setting Up - NetWare AXIS 540/640 User’s Manual44Section 4 Setting Up - NetWareThis section describes how to continue the installation of the AXIS540/640 in the NetWare environment. Identify which transportprotocol you are running on your network and which installationmethod you should use. Continue the installation by selecting theappropriate installing instructions from the table below:If you intend to operate your AXIS 540/640 in a multiprotocol, mixedenvironment, you should also proceed to the other relevant sections inthis manual, namely:Section 5 Setting Up - Windows, on page 55Section 6 Setting Up - OS/2, on page 81Section 7 Setting Up - Macintosh, on page 87Section 8 Setting Up - UNIX, on page 93InstallationmethodTransportprotocol ActionNDPS TCP/IPIPX/SPXSee Setup using NDPS, on page 45Proceed with Installing the AXIS 540/640 in NDPS environments, on page 46.Queue basedprintingIPX/SPXIf you have performed the basic installations as described in Basic Setupwith AXIS NetPilot, on page 27, the AXIS 540/640 is already installed forprinting in the NetWare environment.IPX/SPXAdvancedconfigurationIf you need a more advanced installation that is not covered by the AXISNetPilot Installation Wizard, continue with Advanced Installation using AXISNetPilot, on page 48.Pure IP See Basic Queue-based Printing (Pure IP), on page 52
