WindowsAXIS 540/640 User’s Manual Section 5: Setting Up - Windows 63Windows NT4.0 and Windows 2000Installing TCP/IPPrinters in WindowsNT 4.0/2000Install the AXIS Print System software on your Windows NT 4.0workstation, if you have not already done so. AXIS Print System canbe downloaded from the AXIS Online CD or from the Axis WWWhome page at http://www.axis.com/.To enable printing in the TCP/IP environment, you must ensure thatthe TCP/IP protocol is enabled on your client.The set of instructions you should use to install TCP/IP printer portsis dictated by the IP address of your AXIS 540/640:• If you have an active DHCP server on the network or if you havealready set the IP address of the AXIS 540/640 using anothermethod, you should follow the installation instructions presentedin Installing TCP/IP Printer Ports, on page 65.• If your AXIS 540/640 is not assigned with a valid IP address, youshould follow the installation instructions presented in InstallingTCP/IP Printer Ports and Setting the IP Address, on page 63.Installing TCP/IPPrinter Ports andSetting the IP AddressFollow the instructions below to install an AXIS Raw TCP/IP printerport and set the IP address of the AXIS 540/640, using AXIS PrintSystem:1. Start AXIS Print System by selecting AXIS Print System from theStart menu.2. AXIS Print System starts. Select Search for newly connected printserver... and click Next>.3. Read the instructions and click Next>.
