MacintoshAXIS 540/640 User’s Manual Section 7: Setting Up - Macintosh 87Section 7 Setting Up - MacintoshHaving connected the AXIS 540+/542+ to your network, this sectionnow describes how to set up your AXIS 540+/542+ for printing inMacintosh environments using AppleTalk.If you intend to operate your AXIS 540+/542+ in a multiprotocolenvironment, you should also proceed to the other relevant sections inthis manual, namely:Section 4 Setting Up - NetWare, on page 44Section 5 Setting Up - Windows, on page 55Section 6 Setting Up - OS/2, on page 81Section 8 Setting Up - UNIX, on page 93Note: ❏ The AXIS 640 and the AXIS 642 models do not support printingin the Macintosh environment.Installation Using the Chooser WindowBasic Configuration Basic configuration in AppleTalk is performed simply by opening theChooser window and selecting a printer.You can change the default name of your AXIS 540+/542+ or any ofdefault parameters by editing the config file. To access the config filefrom a Macintosh, you can use:• any Java enabled Web browser• FTP using MacTCP, Fetch or AnarchieIn order to use any of the methods, you must assign an IP address tothe AXIS 540+/542+ as described in Setting Parameters, on page 91.
