Configuration PossibilitiesAXIS 5500 / AXIS 5550 User’s Manual 113Example:Follow the instructions below to add a string after the print job:1. From the print server’s internal Web page, select Admin | LogicalPrinters.2. Select the PR5 tab.3. Enter the string 04 in the String After Print Job text field.4. Click the OK button.Example:Follow the instructions below to add strings before and after the print job:1. From the print server’s internal Web page, select Admin | LogicalPrinters.2. Select the PR4 tab.3. Enter the string 1B 26 6C 31 48 in the String Before Print Job text field.4. Enter the string 1B 26 6C 34 48 in the String After Print Job text field.5. Click the OK button.String Substitutions The string substitution function performs search and replace operationson the print data. The primary application is to replace printer controlcommands. Up to twenty string substitutions may be specifiedindividually for each logical printer.All strings must be entered as hexadecimal byte values, and each matchand substitute string must be preceded by a count byte.You substitute command strings by editing the String Substitutions(PRx_STR.) parameter.Example:Assume that the logical printer PR5 is configured as a PostScript printer and that you want toappend the PostScript End of File character (hex 04) after each print job.You have an HP LaserJet printer with dual trays, and want to print on pre-printed forms whenusing the logical printer PR4. The standard forms are taken from the lower tray, and the pre-printed forms are taken from the upper tray. The string before print job should contain thecommand to select the upper tray: EC&l1H (hex 1B 26 6C 31 48). The string after printjob should contain the command to select the lower tray: EC&l4H(hex 1B 26 6C 34 48).Assume that you want to replace the UNIX/Linux New Line (hex 0A) with an CarriageReturn/Line Feed (hex 0D 0A) for logical printer PR1.
