Basic InstallationAXIS 5500 / AXIS 5550 User’s Manual 21Notes:Making Network Printers available for printing on your PCConfigurationMethodsOnce you have set the IP address of your print server, your networkprinter can be added to any PC on your network. The method that youchoose should be dictated by your printing requirements and yoursupported network environments. Select the appropriate method from thetable below:Installation Methods• If the host name has not been mapped to an IP address, simply replace the host name entrywith the IP address.• The ARP command varies between different UNIX/Linux systems. Some BSD type systemsexpect the host name and node address in reverse order. Furthermore IBM AIX systems willrequire the additional argument ether.• When you execute the ping command for the first time, you may experience asignificantly longer response time than is usual .• The ability to set the IP address with ARP and PING will only be enabled the first 10minutes after restarting the print serverOperatingsystem Printing Protocol See...WindowsTCP/IP“Adding Printers in Windows” on page 23NetBIOS/NetBEUINetWareIP/IPX in PSERVER mode “Setup using NDPS” on page 47IP/IPX in Remote Printermode “Setup using NDPS” on page 47Macintosh Mac OS X AppleTalk “Adding Printers in Macintosh” on page 39UNIX/Linux TCP/IP “Adding Printers in UNIX/Linux” on page 72