Adding Printers in NetWareAXIS 5500 / AXIS 5550 User’s Manual 499. You will find the print server in the next window with the printer attachedon the connected port. Depending on the transport protocol you used whenyou start the installation, the print server should appear as following:• TCP/IP Network protocol:IP Address and Port, e.g: 192.168.70.243 and LPT1Only the ports with a connected printer show up in this window. Ifthe printer is not in the displayed print list, click Manually specifythe print server and do the following: Enter the print server’s IPaddress in the IP Address field and choose a port in the Print ServerPort field:e.g., 192.168.70.243 and LPT1The port numbers are USB1 or LPT1; “other/unknown” denotes theUSB1 port.IPX Network protocol:All the available ports will be presented, regardless if the printers areor not connected to those ports, e.g.AXIS5FF66A_P1 corresponds to the LPT1 port, andAXIS5FF66A_P2 corresponds to the USB1 port.The IPX Addresses for the above printers will appear as:Ports available USB port Parallel portAXIS 5500 other/unknown —AXIS 5550 other/unknown parallel
