Adding Printers in UNIX/Linux74 AXIS 5500 / AXIS 5550 User’s Manual1. Select the Network printer radio button and click Next.2. Enter the IP address or host name of the print server as well as the port youwant to use. Port numbers available for TCP/IP are:Also see “TCP Ports Opened for Raw Printing” on page 158.3. Click Next. Fill in data to help users identify the printer, i.e. name, descriptionand location. Click Next.4. Select printer model and click Next.5. Configure the printer and click Next.6. The printer is set up. Click Finish and the printer is accessible.Typical Invocation from a Terminal WindowStill using Mandrake as an example, open a Terminal Window and typethe command printtool. If you are in a terminal window, the graphicversion will start (as described above). If you do not have the X WindowSystem installed, the command will start a text based version. The sameinformation as was described above will be needed.Note: In Mandrake, even if you type printtool at a shell prompt, printerdrake willautomatically start.Port number USB port Parallel portAXIS 5500 9902 —AXIS 5550 9902 9900
