Appendix B: The Parameter ListAXIS 570/670 MIO User’s Manual 133Appendix B The Parameter ListThis appendix contains an overview of the AXIS 570/670 MIOparameters and how to edit them. A sample parameter list is includedin this appendix. However please note that there may be somedifferences in the parameter list in your print server because of recentfirmware updates.Please refer to the AXIS Network Print Server Technical reference for acomplete description of the parameters. Alternatively you may wish toaccess the Axis WWW Home Page at http://www.axis.com/, whereyou can down-load the latest technical information.Editing usingAXIS NetPilot™The parameters are most easily edited using the AXIS NetPilot™software from a Windows platform.Editing using a WebbrowserIf your network supports TCP/IP you may view and edit theAXIS 570/670 MIO parameter list using any standard Web browser.Editing using FTP You can also use FTP to connect to your AXIS 570/670 MIO. Theparameters are stored in a file named config. The parameters can be setby editing this file by carrying out these three steps:1. Up-load the config file to your system.2. Edit the parameter values.3. Down-load the modified file to the AXIS 570/670 MIO.To use FTP to change the config file:1. Log in to the AXIS 570/670 MIO. Command:ftp ↵. Enter root as user id and pass as password.2. Up-load the config file. Command: get config↵3. Edit the file using your preferred text editor.
