Section 2: Basic Installation26 AXIS 570/670 MIO User’s ManualBasic Set Up for TCP/IPTo establish communication with the TCP/IP network, an Internetaddress and a host name must be mapped to the Ethernet/Node addressof your AXIS 570/670 MIO. To do this, you must firstly acquire anunused Internet address and decide upon an appropriate and uniquename for your AXIS 570/670 MIO. This information then must beincluded into your system host table. The procedures for doing this aredescribed below.Before you startSystem privileges You will need root privileges on your UNIX system, or administratorprivileges on a Windows NT server.Ethernet address You will need to know the Ethernet address of your AXIS 570 MIO toperform the installation. The Ethernet address is based upon the serialnumber of your AXIS 570 MIO. This means that an AXIS 570 MIOwith a serial number of 00408C100086, will have a correspondingEthernet address of 00 40 8C 10 00 86. The serial number of your unitis located on the back of the circuit board.Node address In Token Ring networks the node address is either the serial numberfound on the underside label of the AXIS 670 MIO or a LocallyAdministrated Address.
