Section 2: Basic Installation18 AXIS 570/670 MIO User’s ManualTest the Connection: 1. Switch on the printer.2. Press and release the test button on the AXIS 570/670 MIO toprint a test page.The test page shows the most important parameters and the firmwareversion number. At this stage all that matters is whether the test pagehas printed satisfactorily.Connecting the AXIS 570 MIO to the Ethernet Network1. Switch off the printer.2. Connect a twisted pair (10baseT) or thin wire (10base2) cable tothe AXIS 570 MIO.3. Switch on the printer.4. Successful connection of ther AXIS 570 MIO to your netwoerkwill be confirmed by the intermittent flashing of the NetworkIndicator.5. You are now ready to install your server onto your network usingone of the methods detailed in the Installation Guide, on page 20.By commencing with your preferred installation method, you canfurther verify that your AXIS 570 MIO is properly connected toyour network.Note: o Each AXIS 570 MIO Printer Server is pre-configured with aunique Node Address that is identical to the serial number. Thiscan be changed using the AXIS NetPilot™, the Front Panel of theprinter or any standard Web browser using HTTP, if required.AXIS570 MIO
