Appendix B: Troubleshooting126 AXIS StorPoint CD E100 User’s ManualRunning a Diagnostic TestThe StorPoint CD Web Pages include a diagnostic test that you can run in orderto check the memory and the performance of the connected drives.Before You Begin Note the following:• Users that are currently accessing the StorPoint CD will be interrupted.• The diagnostic test is only available the first hour after startup.• If you want to repeat the test, you must first restart the StorPoint CD.• In order to test the data transfer performance of a drive, a disc including afile larger than 10 MB must be inserted.Procedure To perform the diagnostic test, follow these steps:1. Start the Web browser, and enter the URL of the Diagnostics page in thelocation/address field:Example2. The Diagnostics page appears:Make sure a suitable disc is inserted into each of the drives you want to test.3. Start the diagnostic test by simply reloading/refreshing the Diagnostics page.The test takes a few minutes to complete.4. Reload/refresh the page once again to display the results.http:///this_server/diag.shtmlhttp://192.16.253.80/this_server/diag.shtml
