Axis E100 User Manual

Contents

Axis E100 User Manual Manual pdf 51 page image

Section 4: NetWare (NCP)AXIS StorPoint CD E100 User’s Manual 51Section 4 NetWare (NCP)This section outlines the required configuration settings for running theStorPoint CD in the Novell NetWare environment, how to set up accessrestrictions and accessing the discs.The StorPoint CD supports a maximum of 1000 users in NetWare.If you intend to use StorPoint CD in a multiprotocol environment, proceed tothe other relevant sections in this manual, namely:• “Section 3 - Microsoft & IBM Networks (SMB) ”• “Section 5 - UNIX (NFS) ”• “Section 6 - Macintosh (AFP) ”• “Section 7 - FTP (File Transfer Protocol) ”• “Section 8 - Web Browser (HTTP) ”Network SettingsThe StorPoint CD emulates both a 5.x NDS server and a NetWare 3.x binderyserver. It also supports NetWare/IP and PureIP. In NetWare 5 environments,the StorPoint CD can be integrated as any other 5.0 server simultaneouslyaccessed via IPX, NetWare/IP and PureIP.If your network supports TCP/IP, you can use the Administration Web pages toconfigure the StorPoint CD.NetWare ServerNameThe default NetWare server name is AXIS_NW, where are the last six digits of the StorPoint CD serial number. This is the name thatwill be presented to the NetWare clients on the network. You can change thatname by editing the NetWare Server Name parameter. It is useful to choose amore descriptive name, e.g. in order to indicate where the unit is located.Recommendation! Choose a more descriptive name for your server, e.g. CD Server.Time Synchronization Make sure you specify the time synchronization source properly. Refer to“Date & Time” on page 25.