Axis M20 Series User Manual

Also see for AXIS M20 Series: Installation guide

AXIS M20 Bullet Camera SeriesThe device interface• TCP- Host: Enter the server's IP address or hostname. If you enter a hostname, make sure that a DNS server isspecified under System > Network > IPv4 and IPv6.- Port: Enter the port number used to access the server.Test: Click to test the setup.The context menu contains:View recipient: Click to view all the recipient details.Copy recipient: Click to copy a recipient. When you copy, you can make changes to the new recipient.Delete recipient: Click to delete the recipient permanently.SchedulesSchedules and pulses can be used as conditions in rules. The list shows all the schedules and pulses currently configured in theproduct, along with information about their configuration.Add schedule: Click to create a schedule or pulse.Manual triggerThe manual trigger is used to manually trigger a rule. The manual trigger can for example be used to validate actions duringproduct installation and configuration.MQTTMQTT (Message Queuing Telemetry Transport) is a standard messaging protocol for the Internet of Things (IoT). It was designed forsimplified IoT integration and is used in a wide variety of industries to connect remote devices with a small code footprint andminimal network bandwidth. The MQTT client in Axis device firmware can simplify integration of data and events produced in thedevice to systems which are not video management systems (VMS).Set up the device as an MQTT client. MQTT communication is based on two entities, the clients and the broker. The clients cansend and receive messages. The broker is responsible for routing messages between clients.You can learn more about MQTT in AXIS OS Portal.MQTT clientConnect: Turn on or off the MQTT client.Status: Shows the current status of the MQTT client.BrokerHost: Enter the hostname or IP address of the MQTT server.Protocol: Select which protocol to use.Port: Enter the port number.• 1883 is the default value for MQTT over TCP• 8883 is the default value for MQTT over SSL• 80 is the default value for MQTT over WebSocket• 443 is the default value for MQTT over WebSocket SecureUsername: Enter the username that the client will use to access the server.31