Axis P1357-E User Manual

Also see for AXIS P1357-E: User manual User manual User manual Installation guide Installation guide

AXIS P1357-E Network CameraAbout events• Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).• Output Port – Activate an I/O port to control an external device.• Overlay Text – Display an overlay text. See How to include overlay text in an action rule on page 25.• Play Audio Clip – See Audio Clips on page 30.• PTZ Control- Preset Position – Go to a preset position.- Guard Tour – Start a guard tour. See About guard tours on page 33.• Record Video – Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure thataudio is enabled in the selected stream profile.• Send Images – Send images to a recipient.• Send Notification – Send a notification message to a recipient.• Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configuredunder System Options > Network > SNMP.• Send Video Clip – Send a video clip to a recipient.• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection duringproduct installation and configuration.How to add recipientsThe product can send media files and messages to notify users about events. Before the product can send media files or notificationmessages, you must define one ore more recipients. For information about available options, see About recipient types on page 40.To add a recipient:1. Go to Events > Recipients and click Add.2. Enter a descriptive name.3. Select a recipient Type.4. Enter the information needed for the recipient type.5. Click Test to test the connection to the recipient.6. Click OK.About recipient typesThe following recipient types are available:Recipient types Use with action NotesEmail Send ImagesSend NotificationSend Video ClipAn email recipient can contain multiple email addresses.FTP Send ImagesSend Video Clip40