Axis P1357-E User Manual

Also see for AXIS P1357-E: User manual User manual User manual Installation guide Installation guide

AXIS P1357-E Network CameraAbout system optionsHow to reset to factory default settingsImportantReset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, tothe factory default values.To reset the product to the factory default settings:1. Disconnect power from the product.2. Press and hold the control button and reconnect power.3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.4. Release the control button. The process is complete when the status LED indicator turns green. The product has been resetto the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.905. Using the installation and management software tools, assign an IP address, set the password, and access the video stream.The installation and management software tools are available from the support pages at www.axis.com/support6. Refocus the product.It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance andclick Default.59