Axis Q1604–E User Manual

Also see for Q1604-E: Datasheet User manual Datasheet Installation guide Installation guide

AXIS Q1604–E Network CameraAccessing the productWhen using 50 Hz, the maximum frame rate is limited to 25 fps.NotePower line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts ofthe world use 50 Hz. Local variations may apply, always check with the local authorities.See alsoCapture Mode, on page 21.The Live View pageIf the Axis product has been customized to meet specific requirements, not all the items described below will appear in the Live Viewpage. The following provides an overview of each available button.Controls on the Live View pageThe Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Streamprofiles are configured under Video & Audio > Stream Profiles. SeeStream Profiles, on page 20.Click Pulse to activate the output for a defined period of time, such as switching on an external light for 20 seconds.Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch an external lighton and off.The Manual Trigger button can trigger an event directly from the Live View page. The button is configured underLive View Config > Action Buttons.Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on yourcomputer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available.Enable this button from Live View Config > Action Buttons.The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audioclip and click the Play button.AXIS Media Control viewer toolbarThe AXIS Media Control viewer toolbar is available in Internet Explorer only. SeeAXIS Media Control (AMC), on page 15 for moreinformation. The toolbar displays the following buttons:The Play button connects to the Axis product and starts playing a media stream.The Stop button stops the media stream.The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specifiedin the AMC Control Panel.13