Axis Q1604–E User Manual

Also see for Q1604-E: Datasheet User manual Datasheet Installation guide Installation guide

AXIS Q1604–E Network CameraTechnical SpecificationsTechnical SpecificationsFunction/group Item SpecificationsModels AXIS Q1604-E: 720p resolution, outdoorImage sensor Progressive scan RGB CMOS 1/3” 1.3 MP (optically active)Lens Varifocal 2.8-8mm, F1.2, DC-iris, IR corrected, CS-mountHorizontal angle of view 80°-34°Vertical angle of view 59°-26°Diagonal angle of view 103°-43°Remote back focusFocus range 0.3m to infinitySupport for optional P-Iris lensMinimumilluminationColor: 0.1 lux, F1.2, B/W:0.02 lux, F1.2Color: 0.4 lux, F1.2, B/W 0.06 lux, F1.2 with dynamic captureCameraShutter time 1/29500 s to 2 s , 1/231 to 1/44 s with dynamic captureVideocompressionH.264 (MPEG-4 Part 10/AVC)H.264 Baseline and Main ProfileMotion JPEGResolutions 1280 x 960 (1 MP) to 160 x 901400 x 1050 (1,4 MP) scaled resolution available via VAPIX®Frame rate H.264 30 fps in 60Hz capture mode, 25 fps in 50Hz capture modeFrame rateMotion JPEG30 fps in 60Hz capture mode, 25 fps in 50Hz capture modeVideo streaming Multi-stream H.264 and Motion JPEGH.264: 2 individually configured streams in 720p and full frame rateMotion JPEG: 2 individually configured streams in 720p and full frame rate1 H.264 and 1 MJPEG streams in 720p and full frame rateMore streams if identical or limited in frame rate or resolutionControllable frame rate and bandwidthVBR/CBR H.264Image settings Compression, color, brightness, sharpness, contrast, white balance, exposure control,exposure zones, backlight compensation, fine tuning of behavior at low lightWDR: Up to 120dB (0.4 - 400,000 lux) depending on sceneText and image overlayPrivacy maskMirroring of imagesVideoUsers 20 simultaneous usersUnlimited numbers of users using mulicast (H.264)52