Axis Q1604–E User Manual

Also see for Q1604-E: Datasheet User manual Datasheet Installation guide Installation guide

AXIS Q1604–E Network CameraEventsTo add a recipient:1. Go to Events > Recipients and click Add.2. Enter a descriptive name3. Select a recipient Type.4. Enter the information needed for the recipient type.5. Click Test to test the connection to the recipient.6. Click OK.SchedulesSchedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outsideoffice hours. Use one of the predefined schedules or create a new schedule as described below.To create a new schedule:1. Go to Events > Schedules and click Add.2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.3. Click OK.To use the schedule in an Action Rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.RecurrencesRecurrences are used to trigger Action Rules repeatedly, for example every 5 minutes or every hour.To set up a recurrence:1. Go to Events > Recurrences and click Add.2. Enter a descriptive name and recurrence pattern.3. Click OK.To use the recurrence in an Action Rule, first select Time from the Trigger drop-down list in the Action Rule Setup page andthen select the recurrence from the second drop-down list.To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.33