Azure™ cSeries User ManualPage 7To turn off the system, shut down the tablet by1. Swiping from the right to left on the right side of the screen.a. Select SETTINGS.b. Select POWER.c. Select SHUT DOWN.2. Turn off power to the system using the power switch on the back of the instrument.Azure Biosystems recommends leaving the system on during working hours, as the system takes about20 minutes for the camera to cool after first power up and first launch of the software.2.4 Software InstallationThe Azure cSeries Acquisition Software is pre-installed. When the tablet is poweredon from being in the off state, the software should launch directly into the cSeriescapture software application. Otherwise, to launch the software, double click on thedesktop icon.The system will take a few seconds to initialize. You will see thefollowing screen during initialization:Once the system is done initializing, the software displays thegallery tab, and is ready to use.2.5 Attach Other USB Input Devices to the SystemYou may attach regulatory approved, Windows OS supported USB keyboard, USB mouse or other USBinput devices to any of the three external USB port on the system.3. cSeries Capture Software OverviewAzure cSeries captures high quality images with a very simple and intuitive user interface. The iconbased software allows you to set up the instrument for different applications by simply touching onebutton. There is no need to focus on your sample, you simply need to place the sample in the system,and select an exposure time.3.1 GalleryWhen the software opens, it launches into the Gallery window,designed for opening/closing/saving, and printing your images.It also allows you perform basic image editing on your openedimage.OPEN – Use this icon to open an image that isstored locally, on a USB, or on the network (forsystems that are networked).DesktopIcon