Baby Lock BLMY Service Manual

Contents

3 - 57Needle-presser moduleModulesAssembly30 Presser dial attachment1. Attach the presser dial shaft assy 1 to the presser dial 2, and attach theretaining ring E4.*Key point• See the figure to the right for the presser dial shaft assy 1 Dcut 3 and presser dial 2 hole 3.2. Attach the presser dial gear 4.*Key point• Align the presser dial gear 4 match mark 5 and the firstindentation 7 from the top in the tension spring receiving gear6 .3. Attach the presser dial assy.*Key point• Align the presser dial shaft assy 1 D cut 3 and the presserdial gear 4 D cut.4. Attach the spring plate 8 to the upper unit holder using the screw 1.1 Torque0.78 – 1.18 N·m12376 454Retaining ring E418Taptite, Bind BM3X8