3 - 70Feed moduleModules18 Feed bar spring attachment1. Attach the spring to the feed bar 1 and vertical feed shaft 2.*Key point• Align the vertical rod 3 with the seat of the vertical lever 4.S17S173421S17S17SPRINGXC2547***22.82.6A hook form is a Left-right object.19 Outer rotary hook assy. attachment1. Apply a small amount of Molykote EM30L to the shaft supporter 1.2. Install the outer rotary hook shaft 2, spacer (thin) 3, outer rotary hookassy 4, washer 6 (thick) 5 and the spacer (thin) 3.*Key point• With the D cut 6 in the lower shaft B facing upward, attach sothat the solid dot 7 on the rotary hook assy faces forward.*Attach from a position where 7 is 45 deg. to the right.3. Install the screw 1 in the shaft supporter.Apply MOLYKOTE EM30L to the shaft supportersurfaceSmall amountXC8385***Lubricate the outer rotary hook shaft with OILER BASSYApply liberallyXZ0206***1 Torque1.18 – 1.57 N·m 1123453176Set Screw, Socket (CP)M4X6
