3 - 66Feed moduleModules11 Shaft stopper plate attachment1. Attach the shaft support plate 1 to the base plate with the screw 1.*Key point• Engage the positioning tab on the shaft support plate 1 withthe positioning hole on the base plate.1 Torque1.18 – 1.57 N·m11Screw, BindM3X512 Assembling the lower shaft B assy1. Attach the set screw collar 1, thrust washer 2, lower shaft bushing 3and thrust washer 2 to the lower shaft B assy. 4, and attach retaining ringE6.*Key point• Attach the set screw collar 1 with the ground surface facingthe lower shaft bushing 3.2. Install the 2 screws 1 in the set screw collar 1.*Key point• Attach the set screw collar 1 in a position that allows thelower shaft bushing 3 to turn smoothly.3. Lubricate the lower shaft bushing 3 with 1 – 2 drops of OILER B ASSY.Lubricate the lower shaft bushing with OILER B ASSY 1 – 2 dropsXZ0206***1 Torque0.78 – 1.18 N·m32Retainingring E6114Set Screw, Socket (CP)M4X4
