VIEWING THE SEWING SCREEN196■ Key FunctionsUsing these keys, you can change the size of the pattern, rotate the pattern, etc.No. Display Key Name Explanation Pagem Image key Press this key for a preview of the sewn image. 209n Arrow keys( Center key)Press an arrow key to move the pattern in the direction shown by the arrow.(Press the Center key to return the pattern to the center of the embroideryarea.)232o Rotate key Press this key to rotate the pattern. You can rotate a pattern one degree, 10degrees or 90 degrees at a time.235p Size key Press this key to change the size of the pattern. 234q Density key Press this key to change the density of alphabet character or frame patterns. 237r Horizontal mirrorimage keyPress this key to create a horizontal mirror image of the pattern. 236s Multi color key Press this key to change the color of each letter when sewing alphabetcharacter patterns.238t Memory key Press this key to save a pattern in the machine’s memory, USB media or acomputer.244-248u Return key Press this key to return to the pattern type selection screen. —v Cut/Tension key Press this key to specify automatic thread cutting, thread trimming or the threadtension. For embroidery, these functions are set automatically.227-228w Forward/Back key Press this key to move the needle forward or back in the pattern; useful if thethread breaks while sewing or if you want to start again from the beginning.222-224x Starting point key Press this key to move the needle start position to align the needle with thepattern position.233y Trial key Press this key to check the position of the pattern.The embroidery frame movesto the desired position so you can check that there is enough space to sew thepattern.208z Embroiderypositioning keyPress this key to align the embroidering position using the built-in camera. 205Q Uninterruptedembroidery keyPress this key to embroider the selected pattern with a single color. 241Note• Some operations or functions are not available for certain patterns. If the key display is light gray, youcannot use that function or operation with the selected pattern.qnpomQztursyxv w
