LOWER THREADINGGetting Ready391g Wind the thread clockwise around thebobbin 5-6 times.h Pass the end of the thread through the guideslit in the bobbin winder seat, and pull thethread to the right to cut the thread withthe cutter.a Guide slit (with built-in cutter)b Bobbin winder seati Set the bobbin winding switch to the left,until it clicks into place.a Bobbin winding switch The bobbin winding window appears.j Press . Bobbin winding starts automatically. The bobbinstops rotating when bobbin winding is completed.The bobbin winding switch will automatically returnto its original position.CAUTION• Be sure to follow the process described. If thethread is not cut with the cutter, and thebobbin is wound, when the thread runs low itmay tangle around the bobbin and cause theneedle to break.Memo• Sliding the bobbin winding switch to the leftswitches the machine into bobbin windingmode.Note• changes to while the bobbinis winding.• Stay near the machine while winding thebobbin to make sure the bobbin thread isbeing wound correctly. If the bobbin threadis wound incorrectly, press immedi-ately to stop the bobbin winding.• The sound of winding the bobbin with stiffthread, such as nylon thread for quilting,may be different from the one producedwhen winding normal thread; however, thisis not a sign of a malfunction.Memo• You can change the winding speed bypressing (to decrease) or (toincrease) in the bobbin winding window.• Press to minimize the bobbin windingwindow. Then, you can perform otheroperations, such as selecting a stitch oradjusting the thread tension, while thebobbin is being wound.• Press (in top right of the LCD screen)to display the bobbin winding window again.
