PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)304PRINT AND STITCH (COMBINING EMBROIDERYPATTERNS AND PRINTED DESIGNS)Completed embroidery patterns combined with printed designs are built into this machine.Beautiful three-dimensional embroidered designs can be created by ironing a background onto fabric orprinting it onto printable fabric, then sewing complementary embroidery on top of the background.Using iron-on paperUsing printable fabricStep1 Select a pattern to be combined with the background image. See “Selecting a Pattern” on page 305.Step2 Output from the machine the background image and the positioning image. See “Outputting the Background Image and Positioning Image” on page 306.Step3When using iron-on paperWith a printer, print the background onto iron-on paper, and print the embroidery position sheet on plain paper. Then, ironthe background image onto fabric.When using printable fabricWith a printer, print the background onto printable fabric, and print the embroidery position sheet on plain paper. See “Printing the Background and Embroidery Position Sheet” on page 308.Step4Hoop in the embroidery frame the fabric with the background image ironed on or printed, check the embroideringposition, and then start embroidering. See “Sewing Embroidery Patterns” on page 309.Note• Print the background and embroidery position sheet in their original dimensions. If an image is printedin a different size, the sizes of the embroidery pattern and background may not match. In addition, thebuilt-in camera cannot detect the embroidery position mark. Make sure that the print settings arecorrectly specified.
